Peridynamic and discrete multiphysics for modelling the mechanical and fracture properties of pavement materials

Asphalt pavement experiences different degradation mechanisms under several solicitations. The asphalt mechanical and fracture properties of asphalt mixtures have been investigated using experiment and X-ray CT scan to improve the quality of design. These methods are limited by the number of samples required and high cost. The development of numerical methods provided a powerful tool to investigate the asphalt mixture performance at macro and micro scale, requiring lower number of sample and cost. A key challenge of the numerical method is the reliable modelling of the cracks under different conditions. In this thesis, Peridynamics and Discrete Multiphysics model is used to simulate the mechanical properties and fracture characteristics of pavement materials. The simulations were carried out on the open-source software LAMMPS and visualised on Ovito. Initially, the capability of Peridynamics and Discrete Multiphysics was explored to assess micro-crack formation and propagation in asphalt mixture at low temperatures and under freezing conditions. The results showed the cracks form at the interface and propagate from one void to another along the direction of load. In addition, the water expansion increases the pressure within the voids which adversely has a detrimental effect on the asphalt mixture performance. Experimental studies on three different asphalt mixtures with voids content of 3%, 10%, and 14% were performed at low temperature and freeze-thaw cycle to establish a correlation between the asphalt mixtures’ properties and the voids’ topology. The asphalt mixtures were scanned using Computer Tomography scan to determine the internal structure that evolves during freezing cycles. Semi-circular bending test was used to determine mechanical properties at low temperatures. The results show that asphalt mixture with 3% void content has the lowest and steady degradation rate with the lowest water retention during all cycles. The asphalt mixtures with a 3 high void content have the highest concentration of water in the pores and decay faster during the initial cycles, but slower during the later cycles because there is less water inside the pores which are fully open and do not retain it. A 3D model was used to simulate the asphalts mechanical and fracture properties discussed in the previous chapter at -10 °C. In addition to the previous chapter, asphalt mixtures mechanical and fracture properties at 20 °C were simulated. The results showed that the asphalt mixture performance is reproduced with 23.08% error for the asphalt mixture at -10 °C and 6.9% for the asphalt mixture at 20 °C compared to the experiments. The damage at low and high temperatures such as cracking was reproduced like the real sample. In addition, higher stress occurs in the area where damage was formed

Combined peridynamics and discrete multiphysics to study the effects of air voids and freeze-thaw on the mechanical properties of asphalt

This paper demonstrates the use of peridynamics and discrete multiphysics to assess micro crack formation and propagation in asphalt at low temperatures and under freezing conditions. Three scenarios are investigated: (a) asphalt without air voids under compressive load, (b) asphalt with air voids and (c) voids filled with freezing water. The first two are computed with Peridynamics, the third with peridynamics combined with discrete multiphysics. The results show that the presence of voids changes the way cracks propagate in the material. In asphalt without voids, cracks tend to propagate at the interface between the mastic and the aggregate. In the presence of voids, they ‘jump’ from one void to the closest void. Water expansion is modelled by coupling Peridynamics with repulsive forces in the context of Discrete Multiphysics. Freezing water expands against the voids’ internal surface, building tension in the material. A network of cracks forms in the asphalt, weakening its mechanical properties. The proposed methodology provides a computational tool for generating samples of ‘digital asphalt’ that can be tested to assess the asphalt properties under different operating conditions

Potential of Core-Collapse Supernova Neutrino Detection at JUNO

JUNO is an underground neutrino observatory under construction in Jiangmen, China. It uses 20kton liquid scintillator as target, which enables it to detect supernova burst neutrinos of a large statistics for the next galactic core-collapse supernova (CCSN) and also pre-supernova neutrinos from the nearby CCSN progenitors. All flavors of supernova burst neutrinos can be detected by JUNO via several interaction channels, including inverse beta decay, elastic scattering on electron and proton, interactions on C12 nuclei, etc. This retains the possibility for JUNO to reconstruct the energy spectra of supernova burst neutrinos of all flavors. The real time monitoring systems based on FPGA and DAQ are under development in JUNO, which allow prompt alert and trigger-less data acquisition of CCSN events. The alert performances of both monitoring systems have been thoroughly studied using simulations. Moreover, once a CCSN is tagged, the system can give fast characterizations, such as directionality and light curve

Detection of the Diffuse Supernova Neutrino Background with JUNO

As an underground multi-purpose neutrino detector with 20 kton liquid scintillator, Jiangmen Underground Neutrino Observatory (JUNO) is competitive with and complementary to the water-Cherenkov detectors on the search for the diffuse supernova neutrino background (DSNB). Typical supernova models predict 2-4 events per year within the optimal observation window in the JUNO detector. The dominant background is from the neutral-current (NC) interaction of atmospheric neutrinos with 12C nuclei, which surpasses the DSNB by more than one order of magnitude. We evaluated the systematic uncertainty of NC background from the spread of a variety of data-driven models and further developed a method to determine NC background within 15\% with {\it{in}} {\it{situ}} measurements after ten years of running. Besides, the NC-like backgrounds can be effectively suppressed by the intrinsic pulse-shape discrimination (PSD) capabilities of liquid scintillators. In this talk, I will present in detail the improvements on NC background uncertainty evaluation, PSD discriminator development, and finally, the potential of DSNB sensitivity in JUNO

Using peridynamics and discrete multiphysics to study the effects of air voids and freezing water on the mechanical properties of asphalt

LAMMPS code for the simulations carried out in the manuscrip

Complications of mechanical thrombectomy for acute ischemic stroke: Incidence, risk factors, and clinical relevance in the Italian Registry of Endovascular Treatment in acute stroke

There are limited data concerning procedure-related complications of endovascular thrombectomy for large vessel occlusion strokes

European Multicenter Study of ET-COVID-19

International audienceBackground and Purpose: Acute ischemic stroke and large vessel occlusion can be concurrent with the coronavirus disease 2019 (COVID-19) infection. Outcomes after mechanical thrombectomy (MT) for large vessel occlusion in patients with COVID-19 are substantially unknown. Our aim was to study early outcomes after MT in patients with COVID-19. Methods: Multicenter, European, cohort study involving 34 stroke centers in France, Italy, Spain, and Belgium. Data were collected between March 1, 2020 and May 5, 2020. Consecutive laboratory-confirmed COVID-19 cases with large vessel occlusion, who were treated with MT, were included. Primary investigated outcome: 30-day mortality. Secondary outcomes: early neurological improvement (National Institutes of Health Stroke Scale improvement ≥8 points or 24 hours National Institutes of Health Stroke Scale 0–1), successful reperfusion (modified Thrombolysis in Cerebral Infarction grade ≥2b), and symptomatic intracranial hemorrhage. Results: We evaluated 93 patients with COVID-19 with large vessel occlusion who underwent MT (median age, 71 years [interquartile range, 59–79]; 63 men [67.7%]). Median pretreatment National Institutes of Health Stroke Scale and Alberta Stroke Program Early CT Score were 17 (interquartile range, 11–21) and 8 (interquartile range, 7–9), respectively. Anterior circulation acute ischemic stroke represented 93.5% of cases. The rate modified Thrombolysis in Cerebral Infarction 2b to 3 was 79.6% (74 patients [95% CI, 71.3–87.8]). Thirty-day mortality was 29% (27 patients [95% CI, 20–39.4]). Early neurological improvement was 19.5% (17 patients [95% CI, 11.8–29.5]), and symptomatic intracranial hemorrhage was 5.4% (5 patients [95% CI, 1.7–12.1]). Patients who died at 30 days exhibited significantly lower lymphocyte count, higher levels of aspartate, and LDH (lactate dehydrogenase). After adjustment for age, initial National Institutes of Health Stroke Scale, Alberta Stroke Program Early CT Score, and successful reperfusion, these biological markers remained associated with increased odds of 30-day mortality (adjusted odds ratio of 2.70 [95% CI, 1.21–5.98] per SD-log decrease in lymphocyte count, 2.66 [95% CI, 1.22–5.77] per SD-log increase in aspartate, and 4.30 [95% CI, 1.43–12.91] per SD-log increase in LDH). Conclusions: The 29% rate of 30-day mortality after MT among patients with COVID-19 is not negligible. Abnormalities of lymphocyte count, LDH and aspartate may depict a patient’s profiles with poorer outcomes after MT. Registration: URL: https://www.clinicaltrials.gov . Unique identifier: NCT04406090

Mass Testing and Characterization of 20-inch PMTs for JUNO

Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK)

The JUNO experiment Top Tracker

20 pagesInternational audienceThe main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation